Anden Industrial Dehumidifier 710 Pints / Day 240V Anden

The A710 features VLGR technology, which modulates the refrigeration system based on the load, allowing you to maximize VPD and provide greater control during late flower conditions.

APPLICATION
The Anden Model A710V1 Dehumidifier is the perfect solution for the precise management of humidity required in an indoor growing environment.

Included Items

• Control Model A77 Dedicated monitoring and control of each dehumidifier at canopy height
• Drain fittings: 3/4″ MNPT x 3/4″ BARB – 3/4″ MNPT x 3/4″ Female pipe – 3/4″ x 3/4″ x 3/4″ T-Fitting – 3/4″ P-Trap
• Thermostat wire: 30′ 20 gauge 4-wire

Features

• Control: Onboard digital with diagnostics
• Air supply orientation: Horizontal
• Filter: 29.5″ x 31.5″ 1.75″ MERV 11 (part #5825)
• Refrigerant: R410A
• Coil type: Copper tube, Aluminum fin with I-coat
• Drain connection: 3/4″ FNPT (requires drain trap)
• P-Trap required: Yes (Included)
• Leveling feet: Sold separately (part #5859)
• Hanging brackets: Built-in
• Duct kit: Part #5829
• Warranty: 5 years on all parts including refrigeration system

Specifications

• Capacity(1) PPD at 80°/60%RH: 710
• Energy factor(1): 3.0 L/kWh – 6.35 pints/kWh
• Voltage, Phase, Frequency: 208-240VAC, 1 Phase, 60 Hz
• Current draw (amps)(1): 19.6
• Power (watts)(1): 4,706
• BTU/h(2): 16,168
• Power cord type & length: SJT, L6-30P, 10′
• Hardwire: Field-configurable
• Breaker size: 30 amp
• Wire size: 10 Gauge copper
• CFM: 0.0″ w.c 1760 – 0.2″ w.c 1677 – 0.4″ w.c 1593 – 0.6″ w.c 1510
• Operating range temp/RH: 60/40 to 85/80

Dimensions & weight

• Dimensions: 44 7/8″ W x 34 13/32″ H x 31 23/32″ L
• Weight: 360 lbs

(1) Rated capacity and energy factor test done and current draw measured at 80°F/60% RH inlet air at 0.0 ESP, 240 VAC
(2) Total cooling load @ 80°F/60% RH and 240 VAC